Hawk 20 rigging guide

It is made in both day boat and cabin versions. Support Hawk Day Sailing Boats by making a donation. Per month One Time Only. All Topics in the Forum. Rigging Spinnaker Rigging Spinnaker. My, new to me, Hawk Dayboat is not yet in the water, the last thing I need to sort out is the spinnaker. Hawk This 20ft dayboat is an ideal choice for those who value good performance from a well-mannered boat. Hawk Cabin Hawk Dayboat Hawk is a 20ft self-righting, self-draining, shallow-d.

S ailboat rigging on a sailboat is the collection of apparatuses through which the force of the wind is transferred to the ship, in order to propel it forward. The manual is aimed at new Int’l 4sailors who would appreciate a detailed reference guide. Some basic sailing knowledge is assumed. Locate the mast top and bottom sections.

There is a pin through the bottom section which sets the height of the mast. If you are sailing with a Pro mainsail, insert the pin in the upper hole of the mast bottom section. A smaller version of the olympic 4class, the 4was formerly a youth development class (i.e. young people trained up in the 4before moving onto olympic class boats), the 4has a good class following, and is a good introduction to performance boats.

Due to production supplies certain parts may be slightly modified from those shown. This instruction manual is not a guide to sailing your craft and it should not be considered suitable for the task of learning to sail a boat. Sail Numbers Th e Bahia rigging instructions are a guide to rigging your boat.

Important information Th ere are three hatches and one transom drain bung on the. The picture below shows the most common rigging terminals used at Jimmy Green Marine. Sails: Mainsail with single line reefing system. Jib with furling gear.

It is operated through the cut‐out in the floorboards. Please keep this rigging guide in a secure place and hand it over to the new owner if you sell the boat. Please also see Owners Manual for technical summary and Capsize recovery.

The deck rigging tie downs are non-elastic lines, spaced a few inches apart, running across the hull. Those lines have a couple of sliding wooden toggles connecting them.

Slide the toggles toward the outside of the hull and the lines are tight, slide them together at the center of the hull and you get a little slack. If you have a halyard that is getting hung up in your rig, stepping down 1-2mm might help the halyard run more efficiently.

If you have a larger boat or rig and want to run a thinner halyar consider a double braid line that features a Dyneema or spectra core for strength. Line Diameter Conversion. Guide By: killah63 Yunder.

J = Distance between the headstay termination at the deck and the front of the mast at the sheer line. P = Distance between black bands on the mast, or the maximum luff length of the main. E = Distance between black bands on the boom, or the maximum foot length of the main. Experts in Manufacturing and Exporting Shackle, Turnbuckle and more Products.

A Supplier on Alibaba. Taishanrd Qingdao. Ltd is positioned in No. Running rigging, halyards and sheets for your Santana and many other boats.

The best prices on specialized parts for one-design and cruising sailboats. COVID-Update from Vela Sailing Supply. Parts of the Laser 3. Hardware Location 4. Daggerboard Retainer 13. Stepping the Mast 8.