Norosion coolant

Alkalinity continually buffers the pH of the coolant to safe levels. This prevents acidic degradation of coolant, and associated damage from glycolic acid and acidic combustion byproduct contaminants.

HyperKuhl is a two-in-one super coolant and corrosion inhibitor. When used in straight water coolant, add 1. Because water transfers almost 50% more heat than glycol, bestwill be achieved by using as.

The interface between the cylinder head and engine coolant is the location of nucleate boiling.

It does not matter whether coolant has a boiling of 375oF, or 250oF. Each packet contains four individually-sealed strips that test for: (1) percent glycol (freeze point), (2) nitrite (corrosion protection), and (3) pH (acidic buildup). It is safe and easy to use, and does NOT contain any strong acids that can actually remain in the system even after.

What you may not know is that we constantly test the performance of every other coolant additive on the market. We do this to be certain that our products remain the most competitive. No-Rosion Water Test Packet. I just became the State of Hawaii distributor for the No Rosion line of automotive coolant and oil products.

I was initially looking to purchase this product and lucked into the Hawaii distributorship. I thought this line of products may be beneficial to Pantera owners.

It has the anti corrosion properties of anti freeze. Specific heat capacity of Waterless products ranges from 0. Whereas our old test strips previously tested for GLYCOL, NITRITE, and MOLYBDATE, our new test strips now test for GLYCOL, NITRITE, and pH. The glycol reading determines freeze protection.

The nitrite reading indentifies whether your system contains enough. Edward 96GTS FRookie. It has polymeres that keep hardwater and silicates in solution, extra Borate to buffer pH and oxygen scavengers to remove the O2. General Discussion.

Messages: 320Received: 37. Anyone have any experience with this? Either way, nucleate boiling occurs. Yes, the waterless coolant does boil at a much higher temperature.

The product provides very good overall rates of corrosion protection, and passed AS. Not a hint of scale on the fins and they look new. I drain and refill. I have never replaced a hose.

The coolant is all flushed and swapped over but probably not all the way full yet. These insoluble materials adhere to surfaces inside a cooling system to form scales.

It can be used in plain water without coolant.

To use this product, simply shake the bottle and add to the radiator or reservoir. Replace the cap and run the engine for minutes to circulate the product. To maintain the system, add one pint. You have clicked a page that seems to be very popular.

It’s currently a bit busy. You can have a rest and please slide to verify. I bought some about years ago and used it in all of.

No Rosion is a additive for coolant that seems to have some great things going for it. If you have the time this is worth reading.